LICHIFIT Gearshift Mount Shifter Support LHD TH8A Bracket for Playseat Challenge Chair for Logitech G25 G27 G29 G920

Product Information

Are COMPLIMENTARY& will include everything you need to enhance your sim experience with our superior Mod Interfaces. With this power move, the long planned idea of the Ultimate Mod Mount System was achieved. Along with some real GAME CHANGERproducts! I've confirmed that this works fine with the Thrustmaster TH8A shifter using the provided clamp. It's secure enough, and positioned well enough, that I'm not going to bother making and reprinting a hard-mount plate for it. Much better shifter than the G27/G29/G920 variants by the way. Ambidextrous Universal Reversible System. Position anywhere you feel in either ahorizontal or a diagonalposition. Retaining your Headphones and any console controller on the market In combining two parts of the material via lamination, we create one 6mm desirable interface with various supreme finishes.

LOWDOWN SHIFTER PRODUCT - LOWDOWN SHIFTER

Some of our Mod Interface Plates have a pre-located hole somewhere on the Plates, allowing for the fitment of this Accessory Add On. A solid steel square hook. Suitable for the storage/hanging of headphones or other devices. Adaptation of a RHD Model into a LHD model. Or any required 'Extension'. Position anywhere, adds angles reach. Plus delivers both horizontal & angled positioning. One of the key design principles was to maximise function. Creating a product that is simple to use, to install & 'User Friendly' for all. Word of warning to anyone purchasing, I bought official Playseat mount, and found after installing that the shifter can only be mounted on the right hand side of the wheel (unless someone can share info on how it can be mounted otherwise). The surface is not wide enough to use the rear clamps effectively, but you will want to use the front screw clamp. I tried to reduce the material requirement for the surface by minimizing the size where possible.Can hopefully be printed on printers with a smaller build volume. If it were a one-piece assembly, it would not fit on the print bed of my Qidi Tech 1. In 2 pieces, it fits with plenty of extra space. I could make the shifter surface a good deal larger.

Playseat® Challenge X - Sim Racing Seat | Logitech G Edition Playseat® Challenge X - Sim Racing Seat | Logitech G Edition

I eventually DIY a mount to mount both TH8a and TSS handbrake. A very messy solution, but it works. Will post a pic later. This was designed to be assembled with either M3 screws with 5.5mm nuts, or M4 screws and no nuts. I did not try this with M4 screws as I have a lot of M3's around used for quadcopters. You can expect, high quality grade nuts & bolts, with the correct amount of spacers & rubber washers required. We first achieved that by adding a minimal, chunky highly polished aluminium extension bar to our revered Lowdown Shifter Mod MountSystem.This has since been superseded by An advised edition IF you opt for The Ultimate Mod Mount System for LHD use & wish to mount heavyweight gearx Point Harness System Lowdown Shifter Accessory. Require that extra bit of realism, simply clip on your harness set Also, if I am restricted to the playseat shifter mount, is it compatible with all shifters or is there a particular G29 compatible one I need to get? It required some retraining to get used to it, being from the UK and having gears on the left. I don't particularly like H shifter but had decent success with sequential on my G25 for a long time. Ambidextrous Universal Reversible - System. Mini Mouse Pad To Table Top.Offering angled positioning if required. Mount anywhere in a horizontal position. I got the rubber sheet (To wrap around the frame to protect it) from work and also changed to nuts to nyloc.

Playseat Challenge Shifter Mount - 3D model by jeoje on Thangs Playseat Challenge Shifter Mount - 3D model by jeoje on Thangs

FROM the initial creation of theTH8A Lowdown Shifter Mod Mount System in 6 graphic finishes. The size of a DVD! Horizontal - Vertical - Diagonal Mounting Options. 50 x 50mm - 75 x 75mm - 100 x 100mm hole patterns. Button Box Accessory - Apex Sim Racing + More Built by adhesion & high pressure in to a Tri-layer sheet material. Aluminium on both external surfaces with a hardened compressed ABS plastic core. Creating a product that is very light, extremely strong, durable & rigid. Heavy duty, mechanical secure replacement clip for the attachment of the velcro strap to the tubular construction of the Playseat Challenge. A pre-built product - Strip to fit.Ambidextrous Universal Reversible - System. Mount anywhere in a horizontal position. Designed to hold many drink receptacles on the market. Easy fit system. Phase 4 is the final stage in Lowdown Shifters model. The birth of a brand new simulator concept, currently at prototype stage. SINCE​ Phase 2, Lowdown Shifter has developed the product range further. Designed based on your demand.

Playseat Challenge right side DIY shifter mount guides? Playseat Challenge right side DIY shifter mount guides?

Phase 3 offers more creative product innovation in logical design. For this range it demanded the introduction of steel, our new material in application. I've seen people do something at home to mount G27/T8HA or whatever it's called for Thrustmaster, on a Challenge chair. I'm a noob with stuff like that and wanted to know if anyone has a DIY guide? Compatibility - Designed specifically for the PSC - Could be improvised/used for another/equal application. You may wish to mimic or be naturally used to driving a right hand drive vehicle on the road or highwayDesigned so that on fitment, it delivers another variation to the product. Extending any Mod Mount System further from the seat/chair/simulators main construction, free from obstructions. For some reason, every time I make a change to this design, I need to execute the Combine-Cut functions again for the part<>Screw_Hole_Tools before exporting to STL. I'm not sure why, but the countersink holes always disappear on me.