NIKE J Guard-Ce Soccer Shin Guards

Product Information

A well-designed shin guard should provide adequate protection for the shank, but allow range of motion of the ankle and the knee (Eugene, 2003).

With this in mind, in this study the various forces transmitted to the front of the tibia under similar impacts were measured. Three commercial polypropylene shin guards (Adidas Predator™, Adidas UCL™, and Nike Mercurial™) and two custom-made carbon fiber shin guards were examined. During HIF trials, the maximum force values measured by the sensors attached to the front of the tibia under the shin guard were 143. Splash guards are designed to help protect your vehicle body against mud, salt, stones, tar, grit, snow, etc.

Shinguards should fit from just above the bend of your ankle when you flex your foot to a couple of inches below the knee. In: Proceeding of Society of Automotive Engineers, 29th Stapp Car Crash Conference, Warrendale, PA, USA. The experimental setup had the following parts: 1) A pendulum attached a load cell at the tip (CAS Corp. Similarly, no consensus exists on the impact forces required to produce soft tissue injuries such as contusions (Ankrah and Mills, 2003; Francisco et al. The Nike Mercurial™ and the Adidas Predator™ models have an identical total thickness of 10 mm, but the outer shell of Nike Mercurial™ is 1 mm thicker.

Made of high-strength polyethylene, inside light EVA foam, which has an excellent shock-absorbing property. Please know that I too will care for and treasure this volume that will no doubt, be loved and highly regarded in my small collection. This proves that we produced tibias with a resistance level close to those recommended in previous studies (Heiner and Brown, 2001). The adaptor at the lower end was fixed to the human-like SACH-type prosthetic foot applying the appropriate prosthetic technique.Testing shin guards according to the BS EN 13061 standard will only aim to evaluate protection from soft tissue injury caused by cleats. Shin guards provide shock absorption and facilitate energy dissipation, thereby decreasing the risk of serious injuries.

is an American multinational corporation that is engaged in the design, development, manufacturing, and worldwide marketing and sales of footwear, apparel, equipment, accessories, and services. for both carbon shin guards ( Table 3); there were no significant difference between the two carbon shin guards. The Load Cell-2 (at the back of the swing) was attached to the tip of an adjustable turnbuckle with a steel string. To facilitate the assembly of the components, the lower and upper ends of the artificial tibias prepared were not modeled to resemble the lower and upper ends of a natural tibia.To increase energy absorption, the shin guard shell should be thick and rigid in the transverse direction; however, an increase in length does not provide better shock absorption (Ankrah and Mills, 2003; Francisco et al. In this study, three artificial carbon fiber tibias were produced as described by Heiner and Brown, 2001.